Stand Brief Builder

How to write an exhibition stand design brief

Last updated: September 2026

Stand builders often receive requests such as "we need a booth, roughly 6 by 6, can you send a quote?". With so little information, the builder can only guess, not calculate. And if you ask several quotes, each will make different guesses. Therefore the quotes cannot be compared, and a lot of time will be spent clarifying what you actually need.

A booth design brief is the solution: one document that includes what any builder needs to design and prepare a quote for the same stand.

Preparing a good brief saves you time and makes the offers comparable.

In short: an exhibition stand design brief is one forwardable document carrying your fair, space, goals, required contents, a layout sketch to scale, style references, the offer's scope and a deadline. The free Stand Brief Builder on this site writes it with you, in the browser, no signup.

What a stand design brief is, and what it's not

The brief is not supposed to be a design. That's usually the stand builder's job. They have seen clients with similar needs and solved similar problems many times before, so their experience is their added value.

Your brief should contain the facts that only you know: which fair, which hall, what dimensions, what products must fit in, what you're trying to achieve with this booth, references you like, what they should include in the offer, etc.

The sections, in the right order

The fair and the spot. Event name, dates, hall. Your builder needs these to be able to follow the venue's guidelines regarding rigging, maximum height, safety rules. These often vary from hall to hall in a given event.

The space. Dimension and how many open sides. For example "6×6m, corner (2 sides open)". The open sides affect every aspect of the design, and what your placement means deserves two minutes of your attention before you write it down.

Goals. A short explanation about what you want the stand to achieve: getting leads, promote a product, announce a new product, make deals. The designer cannot optimize for all at the same time, so if you have several goals, make sure to order them by priority.

What should fit in. This is the heart of the brief. Meeting rooms, storage room, products on display, screens and LED panels, a bar, a stage. Write it in the builder's language and let the designer decide the how.

A layout sketch, to scale. A rough plan of what goes where, with the booth's real proportions. This turns three pages of lengthy explanations into one clear figure. It does not need to be pretty; it needs to be to scale, because a sketch that hides an impossible layout produces quotes for an impossible stand.

Map out your stand on a 50 cm grid with our layout planner and visualize your complete space. Below is an example of a pre-made 10×6 stand.

trolleySgroupsMeeting room×5local_cafeBarMpackage_2Product 2Mpackage_2Product 3Mpackage_2SchairSitting areaSstandatlas.com10m6m1 m

Drag a zone by its label; the board slides the others aside. This is a small taste of the full tool. Access full tool

When you are ready, draw your own booth in the layout planner: same board, with everything unlocked.

Style and theme. Your brand colors and VI rules, build materials, example of booth designs you liked, the atmosphere you want to create. For this, you want to show pictures and explain why you liked it. A few photos will say more than a text description like "sleek design with warm atmosphere". Product photos and 3D models will also help. Remember that the designer has never seen your machine and its scale.

What the offer includes. The classic package is design, build, graphics, transport, assembly. But it's not obvious and some builders quietly leave out some elements to look cheaper against competitors. AV equipment, storage of product crates during the event, project management, etc. By listing them, you can make sure that every builder quotes the exact same scope.

A budget frame. This one is optional, and whether you need it is a real question. There are pros and cons that depend on your exact situation. If you do, a range or a maximum is enough.

The proposal deadline. It's an obvious one but often overlooked. Set it well ahead of the fair. When to send the brief has its own arithmetic: you want enough time for design feedback rounds, last minute requests and getting approval from your management.

The complete brief, tickable

Mistakes to avoid

Designing too much. "Bar on the left, counter on the right, screen there". The last thing you want to do is to lock a designer into what you think is a must. Say what must be included and why, but don't say where it should be. Instead, what you can do is prepare a layout sketch and send it as a starting point.

Sending your brief too late. Even the best builders need a few weeks to a few months of preparation. For major fairs, sending a brief four months in advance is actually late and this can cause some express surcharges.

Prepare it well, send it multiple times

The whole point of writing this document is that you do it once and you forward it to as many builders as you want to invite to pitch. And whether you invite two or three builders, they all work on the same brief, and present to you three comparable offers.

The brief builder is there to help you turn the booth you defined in the cost calculator and the layout sketch from the planner into a concise document, with everything a builder needs to know. Add your goals, reference pictures, and share it as a PDF. Everything stays in your own browser, nothing is saved on a server.

Turn your booth into a brief

Your numbers and your layout sketch are already the difficult part. The brief builder writes them into one easy to share document.

Build my briefarrow_forward

Free, no signup. For real.

Read next

What should an exhibition stand brief include? →

The ten-section checklist, tickable, with the parts the tools pre-fill for you.